34
interference between each other.
Note: This function is available only in digital mode.
Pseudo Trunk
While slot is set as pseudo trunk, and one time slot is already occupied, it can
automatically switch into the free one. If the pseudo trunk TX time slot is set as
none, both time slot 1 or time slot 2 can transmit; if the pseudo trunk TX time
slot is set as 1, press PTT key to call only on time slot 1; if the pseudo trunk TX
time slot is set as 2, press PTT key to call only on time slot 2. The TX time slot
is invalid for replying, press PTT button to call on the slot which received
signal.
Note:
In order to guarantee the stability of communication, the transmitter and the
receiver will enable pseudo trunk function at the same time.
Radio Priority-Based Interrupt
The call priority feature allows you to interrupt the on-going call on current
forcibly, a preemptive call can interrupt other on-going calls with lower priority
to release the channel for itself. There are 5 voice priorities available, level 0 is
lower, level 3 is higher, and emergency call is the highest. To transmit the
Priority Interrupt command also can press the programmed [Priority Interrupt]
key, in order to make the channel free for new call or message transmission.
Note: This function is available only in digital operation.
