9
Notes:
This transceiver is designed for a 13.8 V power source. Never use a 24 V battery to power the transceiver.
Before installed the device, please check the correct polarity and the voltage of the battery. Pay attention to
connect and cut off the battery as following:
using specified transceiver power cable to connect battery terminals; red connects to the positive (+) terminal
and black connects to the negative (-) terminal
，
when connecting will be carefully to prevent the risk of
short circuits.
Confirm the correct and security of the connections, then turn on the power to operation.
Do not remove the fuse holders from the cable, otherwise the incorrect connection may lead to the device get
smoke.
Microphone Installation
Open the accessory jack cover, then align the arrows with the left of panel and plug, press
firmly on the plug until the locking tab clicks. To pull microphone away from transceiver, pull the
head of microphone latch out.
Fixed Station Installation
In order to use this transceiver for fixed station operation, you will need a separate 13.8 V DC
power supply (not included). The recommended current capacity of your power supply is 15 A or
more.
The power supply and fixed station can place in work table; also you can install it on wall by
suitable bracket.
