BelFone BF-TD300, Руководство по обслуживанию

Страница: 22 / 35

22
the programmed key to send call alert to a private call.
Talk Around
When your repeater malfunctions, or when radio is out of repeater’s range, you
can continue to communicate in talk around mode. While enable talk around
feature, by this time TX frequency is the same as to RX frequency. Press the
programmed Repeater/Talk Around key to switch between repeater modes
and talk around mode. Switch to talk around, a “talk around” sound; switch to
repeater mode, a “repeater” sounds.
Via programmable software to set it: Channel folder → Zone → a digital or
analog channel → Allow Talk Around
Note：To enable this function, TX frequency should be different from RX frequency, and
the channel will set as allow talk around on the programming software.
TX Power
You can switch power levels to Low or High. If you communicate with radio
located at a distant place please select High power; if you communicate with
radio located at a close place please select Low power to save battery. Press
the programmed High/Low Power key to switch between high power and low
power. Switch to high power, a “high power” sounds; switch to low power, a
“low power” sounds.
Press programmed High/Low power key to switch power level or select power