THE
SCIENCE
BEHIND HEAT
Description of Parts
Instructions for Use
Before First Use
When using this Convector Heater for the first time, a slight odour may be emitted. This is
normal and will subside after a few uses.
Place the Fan Heater on a flat, stable, heat-resistant surface in an open space, at least 1 metre
away from furniture, curtains or any other flammable materials. Check that the air intake on the
rear of the Fan Heater is not blocked.
Setting Up the Convector Heater to Free Stand
STEP 1:
Attach the two moulded feet to the base of the Convector Heater with the 4 small
screws provided, using a Philips screwdriver.
STEP 2:
Place the Convector Heater on a flat, stable, heat-resistant surface in an open space, at
least 1 metre away from furniture, curtains or any other flammable materials.
STEP 3:
Ensure that the air intake on the base of the Convector Heater is not blocked.
EH0576 Convector Heater
7
1. Main body
2. Carry handle
3. Adjustable thermostat
4. 750 W heat setting switch
5. 1250 W heat setting switch
6. Moulded feet
4
2
3
5
6
1
