Beldray EH0197WK, Инструкция по эксплуатации

Страница: 5 / 9

Instructions for Use
Assembly
Assemble the heater and the base plate together in the following sequence:
1. Remove the screws (with white caps) from the bottom of the body and retain.
2. Feed the power cable through the clips on the base plate, use the diagram (Fig. 2)
for guidance.
Caution: The heater will only fit one way into the base plate. Do not attempt to force the
heater into the base plate if it does not fit.
3. Secure the base plate to the heater using the screws, checking they are tightly secured.
4. Ensure that the power cable is clipped into place through the slots provided (Fig. 2). If not
correctly secured, the heater will be unstable and function intermittently.
Operation
Position the heater on a flat, level surface, insert the plug into the mains power supply and switch
on, if applicable.
Press ‘Power Switch 3’ to turn on the heater.
When the heater is switched on, adjust the temperature to suit your needs by following
the guide:
‘Power Switch 3’ ~ Low Heat (400W).
‘Power Switch 3’ + ‘Power Switch 1 or 2’ ~ Medium Heat (800W).
‘Power Switch 3’ + ‘Power Switch 1’ + ‘Power Switch 2’ ~ High Heat (1200W).
EH0197WK Halogen Heater
6