Instructions for Use
Before First Use
STEP 1:
Check that there is no damage to the plug-in heater.
STEP 2:
Plug the plug-in heater into a compatible socket at least 1 metre away from
furniture, curtains or any other flammable materials. Do not block the air intake on the
back of the plug-in heater.
Note:
When using the plug-in heater for the first time, a slight odour may be emitted.
This is normal and will soon subside. Allow for sufficient ventilation around the plug-in
heater. Check the wall socket for damage before and after use.
Using the 500W Handy Plug-in Heater
STEP 1:
Plug in and switch on the plug-in heater at the mains power supply.
STEP 2:
Press the On/Off switch to the 'on' (1) position. To turn on the plug-in heater,
press ( ).
STEP 3:
Press '
+
' to increase the temperature output; press '-' to decrease the
temperature output. The temperature can be set between 15 °C and 30 °C.
STEP 4:
To increase or decrease the fan speed, press '
+
' and '
-
' at the same time. Press
both buttons together once for a low speed setting; the LED temperature display will
show 'LL'. Press both buttons together twice for a high speed setting; the LED
temperature display will show '
HH
'.
STEP 5:
Activate the timer setting by pressing ( ), the display will change from '°C to
'HOURS'. Press ( ) until the desired number of hours has been selected, 12 hours is the
maximum selection.
POWER OFF
-
If the timer function is set when the plug-in heater is switched on, the
number of hours is set to when the heater will turn off.
POWER ON -
If the timer function is set when the plug-in heater is switched off or on
standby, the number of hours is set to when the heater will turn on.
STEP 6:
To switch off the plug-in heater, press ( ). Allow the fan to cool for approx. 60
seconds. Press the on/off switch to the 'off' (
O
) position before unplugging the plug-in
heater.
Note:
The plug-in heater will only produce heat if the set temperature is higher than the
room temperature.
Warning:
Never leave the plug-in heater connected to the mains power supply whilst
not in use.
5