Beldray BEL0537, Инструкция по эксплуатации

Страница: 8 / 12

BEL0537 – Window Cleaning Vacuum
8
Using the Window Cleaning Vacuum
STEP 1: Fill the spray bottle with a mixture of water and diluted window cleaning concentrate.
STEP 2: Use the spray bottle and the microfibre wipe pad to wash over the area of window to
be cleaned.
STEP 3: To turn on the window vacuum, press the ‘On/Off’ button; push it again to turn it off.
STEP 4: Place the squeegee head against the window surface in a vertical position.
STEP 5: Clean the window from the top to bottom using long, straight, downward movements.
This will avoid leaving drip marks or smears on the window surface.
STEP 6: The window vacuum can now be used to remove any excess water remaining on the
window surface. Whilst switched on, hold the window vacuum vertically where the excess water
has collected and allow it to suck up the liquid.
Note: To lock the nozzle on the spray bottle when it is not in use,
twist it in a clockwise direction.
The indicator light on the window vacuum will flash blue approx.
10–15 seconds before the battery runs out of charge.
Emptying the Water Tank
STEP 1: Ensure that the window vacuum is turned off and unplugged from the mains power supply.
STEP 2: Detach the water tank plug from the base of the water tank and tilt to drain away any
excess water.
Note: The water tank should be emptied after each use.
Warning: Do not allow the water tank to fill beyond the 50 ml Max.
fill level, as this may cause water to leak from the vents and cause
damage to the window vacuum.
Storage
Before storing in a cool, dry place, ensure that the window vacuum is cool, clean and dry.
The window vacuum may need to be recharged after storage, before the next use.
Specifications
Product code: BEL0537
Battery: 3.7 V 2000 mAh Li-ion battery
5 V DC 700 mA charger (included)
Tank volume: 50 ml