Belden Thinklogical SDI-000412-LCRX, Руководство по эксплуатации продукта, Страница: 10 / 21

Page 10
12G SDI Extenders Product Manual
thinklogical
Rev. A, Sept. 2020
Receiver Design Features
Each module features a mounting bracket on each side.
•
Dual-purpose USB mini-B Update Port:
➢
Firmware Updates via FPGA Download Utility (see pg. 21).
➢
Diagnostic and configuration information is available via a terminal program such as PuTTY or
Teraterm. The serial port is configured as:
Baud Rate: 38.4K, Data Bits: 8, Parity: None, Stop Bits: 1, Flow Control: None
➢
1 USB Mini-B cable supplied, per chassis
•
Select and Store Buttons:
For video formats that allow conversion, use the Select Button (B2) to cycle through the available
video formats. The Video Format LEDs will change to reflect each format, which becomes active
immediately (see
Signal Formats Table 1 on pg. 12). Pressing the Store Button (B1) saves the
current format to non-volatile memory. After a power reset, the saved format will return. If Button 1 is
not pressed, the previously saved format will return.
Receiver Part Numbers:
SDI-000S12-LCRX Single-Mode 10km Optics
SDI-000412-LCRX Single-Mode 40km Optics