Belden Miranda NV9640A, Руководство пользователя

Страница: 80 / 112

70
Operation
Salvo Mode
You can cancel the control-level take by pressing a button other than ‘Take’.
Chop
The chop function is a diagnostic function for routers that support chop. It allows you to switch
rapidly between two sources at a particular destination. The chop interval is defined in the
NV9000 configuration. The default chop interval is 6
fields .
Follow these steps to use chop:
1 Select a destination. The ‘Destination’ field of the display shows the destination you chose.
2 Select a source. This is the first source.
3 Press the chop button.
4 Select another source. This is the second source. The chop is immediately activated on the
routers (of the default destination) that support chop.
To terminate the chop, (1) press the chop button again to turn it off, (2) select the destination
you had chosen for the chop, then (3) select any source.
Salvo Mode
The NV9640A enters a minor “salvo mode”
1
when you press a salvo button. Salvo mode is a
temporary mode, usually brief, where you are given an opportunity to reconsider the salvo you
are about to execute. The NV9640A’s display tells you the name of the salvo and instructs you to
press the take button to execute the salvo. If you wish to cancel the salvo before it executes,
press the salvo button again.
After you press take or cancel the salvo, the panel returns to its previous mode.
See Salvo on page 63.
Menu Mode
The NV9640A enters menu mode when it has a menu button and you press it.
The menu has 4 menu choices and an exit button:
1. Other panels, such as the NV9601, have a more extensive “salvo mode.”
SOFTWARE SOFTWARE
VERSIONS VERSIONS USER USER PANEL PANEL
LCD LCD
CONTROL CONTROL
• • •
EXIT EXIT