Belden Deutschland GmbH - V1.0 – 22-08 - Subject to errors and changes
Crimping
Step 1
Open crimping tool.
Step 2
Make sure that the contact is at the center of the crimp profile
after being pushed forward.
Step 3
Bring the crimping tool into the locked position (1-2 clicks).
Step 4
Push the stripped conductor into the contact.
Step 5
Close the hand tool completely until the safety ratchet enables the
tool to be opened.
Step 6
Remove crimped contact.
Care and Maintenance
Possibly, remove existing material and dirt residues, clean crimp
zone. Check the tool for correct closing of the profiles, clean
moving parts and lightly oil it (machine oil SAE 20).
Clean after 75 crimping.
Crimp check after 1,500 crimping.
Maintenance after 7,000 crimping or 3 years.
•
Use only for crimping!
•
Only Belden crimp contacts can be processed with the tool!
•
Protect the tool from dust and moisture!
If damage is found, only have the repair carried out by authorized
specialist personnel!
* Specification for measuring the crimp dimensions:
English
T1 Hand Crimping Tool
AWG 28-26
Part-Nr.:
932507006
Part Description:
XZC0706
AWG 24-22
Part-Nr.:
932507007
Part Description:
XZC0707
