Belden Hirschmann MACH102 Series, Руководство пользователя

Страница: 34 / 62

34
Installation MACH102
Release 07 12/2020
2.1.6 Supply voltage
The input voltage range of the MACH102 basic devices is designed as
100 V AC ... 240 V AC.
The power supply of the MACH102-8TP-R, MACH102-8TP-FR, and
MACH102-24TP-FR devices is designed redundantly.

MACH102-8TP, MACH102-8TP-F, MACH102-24TP-F
Figure 19: Connections of the MACH102-8TP, MACH102-8TP-F and
MACH102-24TP-F at the rear side of the device
1 - MACH102-8TP, MACH102-8TP-F or MACH102-24TP-F device
2 - Power supply 100 V AC ... 240 V AC

MACH102-8TP-R, MACH102-8TP-FR, MACH102-24TP-FR
The supply voltage can be connected redundantly. Both inputs are
uncoupled. The load is not distributed. With redundant supply, the
standard power supply supplies the device on its own. The redundant
power supply becomes active automatically if the standard power supply
fails. Normally the redundant power supply runs in stand-by mode.
The supply voltage is electrically isolated from the casing.
WARNING
ELECTRIC SHOCK
Connect only a supply voltage that corresponds to the type plate of your
device.
Failure to follow these instructions can result in death, serious injury,
or equipment damage.
2 1