7: Administration
UM Configuration BAT-C2
129
Release 01.0.00 04/2019
Static Lease Listings
On this page, the BAT-C2 also provides the ability to pre-assign specific IP addresses to
connected devices using static leases. This would ensure that the connected device (identified by
the MAC address) always gets the same IP address even while using DHCP.
Previously added static leases will appear under
Static Leases
where they can be deleted.
To add a new static lease, complete the fields and click the
Add
button. Newly added static leases
will appear under Static Leases (see
).
To Configure Gateway DHCP Server Settings
Using Web Manager
To modify gateway DHCP server or static lease information, on the
Administration
page,
click
Gateway > Configuration > DHCP Server
.
State
Enable or Disable the DHCP server for the DHCP settings.
Enabled
: DHCP server is enabled
Disabled
: DHCP server is disabled (default).
DHCP Relay
Enable for the gateway to operate as a DHCP relay agent between the DHCP
server on the network and connected Ethernet devices.
Enabled
: DHCP Relay is enabled.
Disabled
: DHCP Relay is disabled.
Start IP Address
Start IP Address of address pool.
End IP Address
End IP Address of address pool.
DHCP v6Settings
State
Enable or Disable the DHCP server for the DHCPv6 settings.
Enabled
: DHCP server is enabled
Disabled
: DHCP server is disabled (default).
Start IPv6 Address
Start IPv6 Address of address pool
End IPv6 Address
End IPv6 Address of address pool
Static Lease List Settings
Description
Delete
Click checkbox beside existing static lease MAC Address/IP Address to
delete, if available and if desired.
MAC Address
Displays the
MAC Address
of existing static leases are listed here.
IP Address
Displays the static
IP Address
of existing static leases are listed here.
IPv6 Address
Displays the static
IPv6 Address
of existing static leases are listed here.
Table 7-13 (Existing) Static Leases
Add a Static Lease
Settings
Description
MAC Address
Enter the MAC Address of the static lease to be added.
IP Address
Enter static IP address of the static lease to be added.
IPv6 Address
Enter static IPv6 address of the static lease to be added.
Add (button)
Click the
Add
button when the new static lease fields have been entered.
Table 7-14 Adding a Static Lease
DHCP Settings
Description
Table 7-12 DHCP Settings (continued)