Configuring the XIP-3901-UDC-IP Application
INSTALLATION AND OPERATION GUIDE
XIP-3901 | 113
Audio Panel
The Audio panel has two tabs (
UDC1
and
UDC2
); one for each of XIP-3901-UDC-
IP’s independent processing
channels. The configuration of the
UDC2
tab is the same as the
UDC1
tab. Only the configuration of the
UDC1
tab is shown below.
The relative processing order of audio panel components is shown below.
Figure 72
Overview of XIP-3901-UDC-IP Audio Processing
10.9.1 Inputs Tab
This tab allows you to set individual audio stream input parameters such as the level, delay, phase invert, and to
mute an input. This tab also supports audio probing: embedded audio group detection, audio presence and audio
type for all incoming audio channels. There are also tabs for incoming audio:
Audio 1
,
Audio 2
,
Audio 3
, and
Audio 4
.
Tab
Audio Channels Supported
Audio 1
CH1 to CH64
Audio 2
CH1 to CH16
Audio 3
CH1 to CH16
Audio 4
CH1 to CH16
