Belden Grass Valley XCU Universe XF, Руководство пользователя, Страница: 43 / 66

XCU Universe XF XF Transmission Base Station User’s Guide (v1.4) 43
Chapter 5 - XCU menu reference
5.5 Security menu
5.6 Diagnostics menu
SDI Live Mode Combined,
1 Phase,
(2 Phases, 3
Phases) Combined User 3 In high-speed video modes this selects the method
of combining high-speed phases for the live viewing
output (Live/Effect (D) connectors):
Combined: all phases (3 or 6) are combined to obtain
the highest signal level for live viewing. Some
blurring may occur when panning or tilting.
1 Phase: only 1 phase is used to obtain highest
sharpness but lower video levels.
2 Phases: two phases are used (only for XS (6X)
video modes)
3 Phases: three phases are used(only for XS (6X)
video modes)
NOTE: try the setting that suits your situation best.
3G Output Level A, Level B Level A User 3 Selects SMPTE 425M Level A or Level B mapping to
be used for 3G outputs (when XCU runs in 3G video
mode):
Level A: direct mapping
Level B: dual link mapping
2SI Payload ID 2SI 2SI, 3G User 3 Selects Payload ID for 4K video modes:
2SI = 2 sample interleave
3G = Quad Link Square Division
Note: this is a setting for backward compatibility.
SD AspectRatio 16:9, 4:3 16:9 User 3 Selects video aspect ratio for SD outputs
SD LetterBox Off, 16:9 Off User 3 Selects Letterbox mode for SD outputs
Menu item Settings Default Level Description
Menu item Settings Default Level Description
Installed level User0 .. User3 User 0 User 0 Selects XCU user level.

Note: switch the unit off and on to take the changes
into effect.
PIN Code <code> — User 2 Enter a PIN code to access Service level
Key
Type Unknown;Unknow
n, Service, R&D,
Factory, Invalid Unknown Service <Advanced settings>
Number 0..1000 0 Service <Advanced settings>
Factory Defaults Exec, ... Exec User 2 Resets all settings to their factory defaults.
Menu item Settings Default Level Description
Cable Power
Camera Power On, Off On User 2 <Advanced settings>