Belden Grass Valley RAT4-EO-1271-MXLR, Руководство пользователя

Страница: 15 / 25

11
Rattler 4
User Guide
LED Display Operation
Rattler Tx Unit
Fig. 2-3: Rattler Tx Unit LEDs
1 Power LED – indicates power is connected and within 5-16 VDC range
2 SIG LED – indicates HD/SDI Signal Presence
Rattler Rx Unit
Fig. 2-4: Rattler Rx Unit LEDs
1 Power LED – indicates power is connected and within 5-16 VDC range
2 Sig Strength LED Display – indicates Received Optical Signal Strength from -20 dBm to
0 dBM
Fiber Optic Signal Strength measurement is explained further in Fiber Optical Channel
Monitoring using the LED Display on page 14.
See below for examples of signal strength indications.
Fig. 2-5: LED indications
The Rattler 4 will indicate a non-standard temperature reading if the LEDs begin to blink all
On and all Off.
Fig. 2-6: non-standard temperature LEDs
If the Rattler unit internal temperature drops below -30 degrees C or above 65 degress C,
the blinking LED indicator will start. At these extreme temperatures, unit performance will
be degraded or cease to function.
Two LEDs lit indicate a signal strength
between -15 dBm and -10 dBm Four LEDs lit indicate a signal strength
between -5 dBm and 0 dBm