Belden Grass Valley NV9000, Руководство пользователя

Страница: 69 / 87

59
NV9601
User’s Guide
To erase a salvo, press selection button 5 (Clear Local salvo) and choose a salvo. You might
need to scroll to see the salvo you want to erase.
This will erase the commands in the salvo, but it will not remove the local salvo name from
the list of local salvos.
(The local salvo names were defined during panel configuration and can only be changed
or removed by reconfiguring the panel.)
Force Release
Press selection button 6, corresponding to ‘Force Release’ to view and change the force
release state for your panel:
Press selection button 1 to enable or disable force release.
A submenu requesting a PIN appears:
Enter your PIN using the keypad. Your PIN is always
3689
. It is not possible to change the
PIN.
Press selection button 7 to cancel your entry and return to the ‘Force Release’ submenu.
Press selection button 8 to confirm your PIN and return to the ‘Force Release’ submenu. If
you enter an incorrect PIN, the panel displays a “bad PIN” message.
Menu
Salvo
Erase
Selection button to erase salvo,
Clear to cancel, LSVO1 5
Or Menu to exit. LSVO2 6
Menu Enable Force Release 1
Force Release
Disabled
Exit 8
Menu
PIN
Use
Keypad to enter PIN.
Cancel 7
Done 8
1 2 3
4 5 6
7 8 9
0