Belden Grass Valley NV8900, Руководство пользователя

Страница: 15 / 41

9
NV8900
User’s Guide
 These LEDs behave differently from those of the AA-to-MADI interface.
The reference signal is represented by an LED. This LED is green when the reference is good
and red when it is not.
An alarm LED is off under normal operation but turns red for the following conditions:
• Overtemperature
• MADI output failure
• Reference is bad or missing
Connectors
At the rear of the MADI-to-AA interface are signal connectors. There are 2 MADI outputs
(BNCs), two video reference connectors (BNC, loop-through), and 8 DB25s for analog audio
input.
Each DB25 supports 8 analog audio outputs. The 8 outputs of a connector correspond to an
enclosed section of the labeling on the front of the unit. For instance, first DB25 connector
is for outputs 1–8 and the corresponding markings on the front of the unit are pair 1/2, 3/4,
5/6, and 7/8.
The power connectors, serial port, and Ethernet port are described under Installation on
page 13.
Each power connection is represented by an LED at the front of the unit. When the LED is
green, its power supply circuit is good, and when the LED is off, the power supply circuit is
bad.
The MADI inputs are identical.
The video reference connectors are “loop-through” allowing you to “daisy-chain” a
reference signal to multiple devices. See
Reference Specifications on page 19.
DIP Switches
There are 8 DIP switches in a recess at the rear of the unit:
1
ON
2 3 4 5 6 7 8
SDO8
CTRL
PS1
PS2
DC IN
+12V
E146905
ETHERNET
MADI OUT VID REF
CONFIG
41-48 49-56
ANALOG AUDIO
INPUTS
25-32 17-24 9-16 1-8
57-64 33-40
Analog Inputs (DB25)
Video Reference
(Loop-Through)
MADI Output (2)
DIP Switches (8)
1
ON
2 3 4 5 6 7 8
SDO8
CONFIG