Belden Grass Valley KMX-3921, Инструкция по установке и обслуживанию

Страница: 59 / 156

59
KMX-3921
Installation & Service Manual
To change the IP address of a KMX-3921 multiviewer using the local control panel
1 Press the icon representing the appropriate card on the Densité 3+ FR4 frame’s local
control panel touch display or press the Select button on the front edge of the card you
want to configure on the Densité 3+ FR1 frame’s local control panel
The Status LED on the selected card flashes orange, and the associated control menu
appears on the display of the Densité 3+ FR1 / Densité 3+ FR4 frame’s local control
panel.
2 On the local control panel, touch the [–] button repeatedly until NETWORK SETTINGS
appears on the display, and then touch the SEL button.
SYSTEM IP EDIT appears on the control panel’s display.
3 Touch the SEL button again.
The current IP address appears on the display.
• Touch the [+] and [–] buttons, to change the current value at the current input
position.
• Touch SEL to move one position to the right.
• Touch ESC to move one position to the left.
4 When the display shows the correct IP address, touch SEL to apply your change.
5 Touch ESC to return to the previous menu level.
SYSTEM IP EDIT appears on the control panel’s display.
6 Touch the [–] button.
NETMASK EDIT appears on the control panel’s display.
7 Repeat step 3 to step 5 to configure the netmask.
8 Once you have set the network mask and navigated back to the previous menu level,
touch the [–] button again.
Note:
You can configure a
KMX-3921
system’s network settings from any
multiviewer card in a multi-card system (for example, cards A, B, C, and so on).
These settings are automatically replicated to all other multiviewer cards. For
more information about the location of multiviewer cards in the frame (cards
A, B, C, and so on), see
Installation of the KMX-3921 in a Densité 3+ Frame , on
page 30.
Note:
You can navigate the menu by using the four buttons on the display:
• Touch the [+] and [–] buttons, to navigate between menu options or
between parameter values.
• Touch SEL to access the next menu level. When a parameter value is
shown on the display, modify the value by using the [+] and [–] buttons,
and then touch SEL to apply the new value.
• Touch ESC to go back to the previous menu level.
• Once you have completed your changes, press the Select button
on the
front edge of the KMX-3921 card to exit the control menu.
Note:
Touching ESC when the input focus is in the first position returns to
the previous menu level.