Belden Grass Valley Kayenne K-Frame, Инструкция по установке и обслуживанию

Страница: 259 / 288

KAYENNE K-FRAME — Installation & Service Manual 259
Creating Compact Flash Cards
Note For Control Panel CF cards, though the progress bar reaches 100% a couple
more minutes are still required to complete the process. During this time
Configuring operating system disk layout... is reported at the bottom of the
screen.
Figure 191. K-Frame Installer, Format CF Card Screen
Note Additional formatting time may be required (perhaps more than an hour) if an
older USB 1.1 port or slow reader/writer device is used.
7. When finished, the Ghost window will close by itself.
• The VP Frame Solid State Drive contains a set of files making a
SWUP bootable image. These files can be seen by the Windows OS.
• The Control Panel CF card now has a Linux O/S that can boot the
Control Panel. These files are not visible to the Windows OS.
CAUTION Do Not format CF cards using Windows.
Proceed with the appropriate update process described below.
Updating System Software on a New Control Panel CF Card
1. Remove the CF card from the reader, power down the Control Panel,
install the CF card in the Control Panel’s processor, and power up the
panel.