Belden Grass Valley Kayenne K-Frame, Инструкция по установке и обслуживанию, Страница: 244 / 288

244 KAYENNE K-FRAME — Installation & Service Manual
— Maintenance
below the SATA drive on the control processor board, as shown in
Figure 169 .
Figure 169. K-Frame Control Processor Board - S2 Boot Mode Dipswitch Location
CAUTION If the Dipswitch settings are not in the UP or Normal position, the system may
not boot.
Lifetime of the Internal Battery
Battery life of the K-Frame Video Processor internal battery is dependent
on the operating time of the switcher.
Table 17. Lifetime of the Internal Battery
Video Processor Frame Battery Replacement
1.
Turn off all power to the Frame before opening it.
2. Using a grounding strap, open the door to the Video Processor Frame
and remove the Controller Board.
3. Remove the old battery by lifting the clip holding it in place.
Capacity GV # Type
1000 mA/h 146013800 CR 2477