Belden Grass Valley Kayenne K-Frame, Инструкция по установке и обслуживанию

Страница: 168 / 288

168 KAYENNE K-FRAME — Installation & Service Manual
Section 5 — Basic Configuration
4. Touch the
Camera Source
data pad—the Ethernet Connected Camera List
pane is displayed.
Figure 115. Ethernet Connected Camera List, Eng Setup, Source Definition Menu
5.
Touch a camera in the Ethernet Connected Camera List.
The Ethernet Connected Camera List pane closes and the selected
camera’s Engineering Name is defined by the selection automatically.
A green
Status LED
signifies a connected camera ( Figure 115 ).
Note The Engineering Name of the source becomes “Cam##” and cannot be edited,
however the Panel, OLED, and Menu Name can be changed in the Source
Patch menu (see the
Kayenne K-Frame User Manual
for more informa-
tion).
Acquire Resources
A camera resource can be acquired by Suite 1 or Suite 2 but not both
(E-MEM control is only from the suite currently controlling the camera
source). Camera resources are acquired in the Eng Setup, Acquire
Resources, Camera Control menu.
Camera resource acquisition is represented in the Camera Controls
Acquired in Suite pane in the Camera Controls menu as follows: