Belden Grass Valley Kayenne K-Frame, Инструкция по установке и обслуживанию

Страница: 136 / 288

136 KAYENNE K-FRAME — Installation & Service Manual
Section 5 — Basic Configuration
Fixed Sources
Additional, fixed internal sources exist on a Kayenne K-Frame system
(
Table 13 ). These internal sources do not have user accessible Engineering
IDs and are not displayed on the Eng Setup Source Definition menu.
These fixed sources are accessible via:
• User Setups. Suite Prefs, Source Patch menu
• User Setups, Panel Prefs, Button Mapping menu
• Eng Setup, Outputs menu
Source Patch Feature
The Kayenne K-Frame system provides a way to map engineering source
IDs to logical IDs, using the Source Patch feature. By default this mapping
is one-to-one, but this feature can be used to quickly set up production ele-
ments for use in a different facility. For example, a show’s effects, DDR
clips, and taped material may have been built in one production truck with
one set of devices, but the next show is scheduled for a different truck. Pre-
viously, to use effects in the other truck the Technical Director (TD) would
need to edit the engineering source definitions in the new truck so they
exactly matched the old truck. By remapping the engineering sources of the
devices in the new truck to the logical sources used to build the effects, all
the effects can be used without having to edit them. Source Patching can
also be used to quickly swap out a defective device during a show without
having to reconfigure the engineering sources. In this case logical names
seen by the production personnel would be identical for that content, even
though the actual device playing the material changed.
Table 13. Fixed Internal Kayenne K-Frame Sources
Area Signals Source Patch Eng. Source Names
ME 1, 2, 3, 4, Pgm
A, B, C, D, Preview A, Preview C,
and ME Viewer (pM) outputs
M1 A, M1 B, M1 C, M1 D, M1 pA, M1 pC, M1 pM
same for M2 - M4,
Pg A, Pg B, Pg C, Pg D, Pg pA, Pg pC, Pg pM
eDPM
Video Out A, C eDA, eDC
Key Out A, B, C, D eDAk, eDCk
internally
generated
signals
Test 1, Test 2 Test
Black, Black Key Blk
White Wht
Background 1 BG 1
Background 2 BG 2
Image Store
Video Out 1 - 10 IS 1A - IS 10A
Key Out 1-10 IS 1B - IS 10B