Belden Grass Valley GV Korona, Руководство пользователя

Страница: 405 / 433

405
Kayenne/Karrera/GV Korona
User Manual
Record a ClipStore Clip
• Select to select the ClipStore channel for recording.
• Select the Record mode button.
• Define the Record Elements you wish to apply to the clip to be recorded.
• Select the Record Enable button.
• Enter a new clip name or an existing clip name if you wish to overwrite that clip.
• Select Enter .
• Select the Record device control button.
• Select the Stop device control button when the desired length of the clip is reached.
Editing Clips
Clips can be edited in the Image Store, ClipStore, Clip Edit menu. There are three types of
clip editing provided:
• Cut Edit,
• Build Edit, and
• Join Edit.
Cut Edit
• Cut Editing allows you to edit a clip in the following ways:
• Rename Clips (use the Rename button).
• Mark a thumbnail, see Cut Edit , on page 405),
• Trim and remove from the head of the clip to the Mark In point ( ClipStore Trim and
Remove , on page 407),
• Trim and remove from Mark Out point to the end of the clip,
• Make sub-clips (including splitting one clip into two) from the current clip ( Make Sub-
clips from the Current Clip , on page 407), and
• Cut Edit while recording a clip ( Cut Editing while Recording , on page 408).
For Cut Edit, select Image Store , ClipStore , Clip Edit and select the Cut button in the Edit
Type mode group.
Mark a ClipStore thumbnail
The Cut Edit menu displays the currently loaded clip in the thumbnail view. If you wish to
change the clip, select the
Change Clip button before editing.
1 Select the Change Clip button to select a clip to edit (unless previously loaded).
2 Either jog, shuttle, or play to the desired frame and select the Mark Thumbnail button
or,
3 Select the Mark Thumbnail data pad and enter the mark point in the pop-up Mark
Thumbnail Point keypad, and select Enter .