Belden Grass Valley CopperHead 3404, Руководство пользователя

Страница: 52 / 113

46
Installing and Connecting the System
Connections between Base Station and Camera Unit
The following fiber connection scenarios do not take into account any customized cable
and connector installations you may have at your facility. For assistance regarding more
complex connection situations please contact Grass Valley, a Belden Brand or your local
authorized dealer.
Tactical Fiber between the Base Station and Camera Unit
Fig. 5-5: Tactical Fiber between the Base Station and Camera Unit
Between the Base Station ( 1 ) the Camera Unit ( 2 ) connect a length of Tactical Fiber Cable
( 3 ). At each end of the fiber cable will be either an OpticalCON or MX Fiber Connector ( 4 )
and ( 5 ). The Base Station connector (
4
) may be mounted either on the front or back of the
Base Station. The camera must be powered by local power, either a Battery or a local AC
Power Supply (
6 ).
SMPTE Hybrid Fiber between the Base Station (powered) and Camera Unit
Fig. 5-6: SMPTE Hybrid Fiber between the Base Station (powered) and Camera Unit
Between the Base Station ( 1 ) and the Camera Unit ( 2 ) connect a length of SMPTE Hybrid
Fiber Cable ( 3 ). At each end of the fiber cable will be either an OpticalCON or SMPTE 304M
Connector ( 4 ) and ( 5 ). The Base Station connector ( 4 ) may be mounted either on the front
or back of the Base Station. The camera will be powered by the CopperHead Power Wafer
Camera Power Supply (
6 ).
Note: Your configuration may have the OpticalCON or MX Fiber
Connector (4) directly mounted on the Base Station Chassis or it may
have a panel mounted connector leading to two ST connectors.