GUIDE TO INSTALLATION AND OPERATION
ADX-1901 |
41
ANNEX 1 – ADX-1901 Local User Interface
LEV1
LEV2
LEV3
LEV4
VALUES
Conditions
STATUS
GENERAL STATUS
REAR TYPE / OPTIC TYPE or HARDWARE ERROR
VIDEO STATUS
NO CARRIER or “FORMAT” / TRS ERROR
AUDIO STATUS
GROUP N# “1 to 4” “VALID or NONE”
METADATA STATUS
TIME CODE
DVITC “VALID or NONE”, VITC “VALID or NONE”, ATC “VALID or NONE”
AUDIO METADATA
S-2020 “VALID or NONE”,
CONFIG
LOAD
[USER1, USER2, USER3, USER4, USER5]
SAVE
[USER1, USER2, USER3, USER4, USER5]
VIDEO IN/OUT
INPUT SELECT
[BNC IN, FIBER IN1]
FIBER OUTPUT
FIBER OUT 1
[OFF, ON]
FIBER OUT 2
[OFF, ON]
METADATA
EXTRACT
TIME CODE
LTC SOURCE
OFF, DVITC, ATC-LTC, ATC-VITC, AUTO
SD LINE NUMBER
[10, …, 20] en 525; [7, …, 22] en 625
SD Only
TIME CODE DELAY
[0, …, 50]
unit=frame
AUDIO METADATA
AUDIO META SDID
[1, …, 9]
AUDIO META DELAY
[0, 2700]
[0, 47]
unit = ms, sample
AUDIO
INPUT
INPUT CH1-16
PHASE INVERT
[OFF, ON]
AUDIO DELAY
[0, 2700]
[0, 47]
unit = ms, sample
OUTPUT
MIXER 1-8
MIX MODE
[OFF, A, A+B, MIX
]
SOURCE A
[CH01, …, CH16]
LEVELA
[-96, …, 12]
step = .5dB
SOURCE B
[CH01, …, CH16]
LEVELB
[-96, …, 12]
step = .5dB
MUTE
[OFF, ON]
0 dBFS SETTING
[0, …, 24]
step = 1dBu
TEST TONE
Output
CH1-2
[OFF, EBU ENABLE]
Output
CH3-4
[OFF, EBU ENABLE]
Output
CH5-6
[OFF, EBU ENABLE]
Output
CH7-8
[OFF, EBU ENABLE]
VERSION
CARD VERSION
CARD V.nnn
CPU VERSION
CPU V.n.n.nnn
FPGA VERSION
FPGA V.n.n.nnn
FACTORY DEFAULT CARD PARAMETERS
[RESTORE]
CARD LED ALARMS
[RESTORE]
Note:
Some menu items may not be present depending on input format, or card configuration.
