1. Slide Boot on Fiber
3. Strip off 24 2 mm of Buffer
**
4. Mark Buffer at 13 mm
5. Clean Fiber
2. Slide Activator Tab
to the Open Position
Light
*
MUST
appear
6. Align the end of fiber’s buffer
at 8 mm and cleave
-
+
Fiber
Express
Brilliance
®
LC-SC-ST
Installation Card
For complete details on this procedure refer to Installation Guide PX105234.
*
When using a Visual fault Locator (VFL) during termination.
**
When using a field cleaver remove 40 mm of buffer.
A copy of the Guide is supplied with each installation kit or visit www.belden.com
Boot
Activator Tab
LC connector
900
μ
m Buffered Fiber
+0.5
-0.0
0
mm
1
0
2
0
3
0
4
0
5
0
8
13
To Scale
©2012 Belden, Inc.
All rights reserved.
Printed in Canada
Document Number: PX105273
Release: F
Date: May 2012
8. Create and maintain a bow
with the fiber, while sliding
the Activator Tab
to the Closed Position
7. Insert Fiber Into Connector up to
the 13 mm Buffer Mark.
Warning: DO NOT try to completely
eliminate residual light
9. Install Boot on Connector
SM - Light
*
MUST dim
MM - Light
*
MUST go out
ST connector
SC connector
