Belanger Full Side Washer Скачать руководство пользователя страница 31

Страница: 31 / 66

FULL SIDE WASHER

1MANUL854

Belanger, Inc. * PO BOX 5470 * Northville, MI 48167 -5470 * Ph (248) 349-7010 * Fax (248) 380-9681

Installation

Waves and Fins Cleaning Material

Hitch Hiker

Note:

Hitch Hiker Fins™ come in 28” for the lower portion of the Hitch Hiker and 30” for the

upper portion of the Hitch Hiker.

Locate the bottom plastic Wave™ and place it on the frame assembly with the opening opposing
the opening on the lower retainer plate (below, left).

Locate the 28” Hitch Hiker Fins™. Place one on each of the pegs with the “fold” following the
rotation of the wheel (below, right).

3) Place the next Wa

ve™ on the frame making sure that the openings are opposing each other.

4) Continue to in

stall the Fins™ and the Waves™ until 5 rows of wash material have been

completed.

5) Locate the

30” Hitch Hiker Fins™. Place one on each of the pegs with the “fold” following the

rotation of the wheel.

6) Place the nex

t Wave™ on the frame making sure that the openings are opposing each other.

7) Co

ntinue to install the Fins™ and the Waves™ until the last 5 rows of wash material have been

completed.

8) Once all of the wash material has been installed, locate the top retainer and the two plastic

bushings that were removed earlier (below, left). Secure them to the shaft above the Hitch Hiker.

9) Slide it down onto the Hitch Hiker and replace the previously removed bolts (below, right).

10) Locate the split locking collars and install one a 1

/4” above the top of the Hitch Hiker hub to

prevent the hub from climbing up the shaft.

Rotation

Closed

(folded) Edge

Содержание Full Side Washer



































































Результаты поиска

Содержание Full Side Washer

Отзывы:

Бренды по названию

Популярные бренды

Belanger Full Side Washer, Руководство пользователя

Результаты поиска

Содержание Full Side Washer

Отзывы:

Бренды по названию

Популярные бренды