bel Digital Audio SAM64 Скачать руководство пользователя страница 2

SAM64 User Manual v1.6

2

Bel Digital Audio Limited

This document confirms that products bearing the CE 

label meet all the requirements in the EMC directive 

2004/108/EC and LV directive 2006/95/EC laid 

down by the Member States Council for adjustment 

of legal requirements. Furthermore the products 

comply with the rules and regulations from 30 August 

1995 referring to the electromagnetic compatibility 

of devices. Bel Digital Audio SAM64 units bearing 

the CE label comply with the following harmonised or 

national standards: 
EMC: 
BS EN 55103-1 :2009 
BS EN 55103-2 :2009 
Safety: 
BS EN 60950-1: 2006 (ed. 2) + A1:2010
Insulation: 
Class1 

FCC Notice

Tested To Comply

With FCC Standards

FOR PROFESSIONAL USE

This equipment has been tested and found to comply 

with the limits for a Class B digital device, pursuant to 

part 15 of the FCC Rules. These limits are designed 

to provide reasonable protection against harmful 

interference when the equipment is operated in a 

commercial environment. 
This equipment generates, uses, and can radiate 

radio frequency energy and, if not installed and used 

in accordance with the instruction manual, may 

cause harmful interference to radio communications. 
Operation of this equipment in a residential area is 

likely to cause harmful interference in which case the 

user will be required to correct the interference at 

his own expense.

 Instructions for Disposal of WEEE by Users 

in the European Union
The symbol shown here is on the product 

or on its packaging, which indicates that 

this product must not be disposed of with 

other waste. Instead, it is the user’s responsibility to 

dispose of their waste equipment by handing it over 

to a designated collection point for recycling of waste 

electrical and electronic equipment. 
The separate collection and recycling of your 

waste equipment at the time of disposal will help 

to conserve natural resources and ensure that it is 

recycled in a manner that protects human health and 

the environment. For more information about where 

you can drop off your waste equipment for recycling, 

please contact your local city office, your household 

waste disposal service or where you purchased the 

product.

User’s Notice and disclaimer:

No part of this manual may be reproduced, 

transmitted, transcribed, stored in a database 

system or translated without the express written 

permission of Bel Digital Audio Ltd. Documentation 

kept by the end user for back-up purposes is excluded 

from the above. 
All products and corporate names mentioned in this 

manual may be registered trademarks or copyrights 

of their respective companies. They are used here 

for indicative purposes only.
The information contained in this manual has been 

carefully checked for accuracy; however no guarantee 

is given with respect to its correctness. Bel Digital 

Audio Ltd. accepts no responsibility or liability for 

any errors or inaccuracies that may appear in this 

manual or the products and software described in 

it. Specifications and information contained in this 

manual are subject to change at any time without 

notice.
© 2016 Bel Digital Audio Ltd. All rights reserved.

This appliance has a serial number located on the 

rear panel. Please record the serial number here for 

your records.
Model Number…………SAM64
Serial Number………………………………………...

Reference To Statement Of Conformity

Содержание SAM64

















Отзывы: