Bel Canto REF1000m, Руководство пользователя

Страница: 7 / 10

R
Panel Connections
Never Connect Either the Positive or Negative Speaker Output to Any Ground Contact!
Connecting any Speaker Output on the REF1000
M
to Ground will cause the amplifier to go into protection and
could damage the amplifier and void the warranty.
1) Power Switch: Power is on when the switch is
toggled to the I position and off in the O position.
2) Input Connections and RCA/XLR switch: When
using RCA cables for the input insure that the
RCA/XLR switch is pressed in to the RCA position.
When using XLR cables insure that the switch is out
in the XLR position.
Do not connect both XLR and
RCA cables to the inputs!
3) Output Connections: Attach your loudspeaker to
the output connectors. Be sure that the polarity of
each speaker is correct and the same so that no
phase inversion can occur.
4) IEC power cord jack: Connect a heavy gauge
power cord from this jack to the wall power supply.
Note the power setting indicated on the back of the
amplifier before connecting the power.
Double-check all connections to and from the
amplifier. Power on the preamplifier in your system,
activate its Mute setting and then power on the
REF1000
M
.
Front Panel Indicator Lamp
What to do if there is hum or ground noise: