manualshive.com logo in svg

Bel Canto PRe6, Руководство пользователя, Страница: 8 / 16

Поделиться
Скачать
Bel Canto PRe6 Скачать руководство пользователя страница 8

Factory Configuration:

The PRe6 has the following factory
input settings:
Input 1: 5.1 Surround
Input 4, 5 and 6: Stereo
Input 7: 5.1 Surround
Input 10: Stereo
Input 11: Stereo
TAPE: Stereo

Modifying Factory Configuration

:

Press the 

ENTER

button on the

remote eight times or press and hold
the 

ENTER

button on the front panel

for two seconds to engage

Configuration Mode

. 

Configuration Mode

allows you to

customize individual inputs/channels.
Navigation is accomplished with the

UP 

and

DOWN

and down arrow but-

ton to select menu options, and the

RIGHT 

and

LEFT

arrow buttons to

select the input you wish to change
(See pages 10-14). If you are called
away for more than 30 seconds while
in Input Configuration mode, the unit
will exit Input Configuration mode.
Your changes will remain in memory
(but won’t take affect) until either the
unit is shut off (deleting the changes)
or you reenter Input Configuration
mode and finish your adjustments,
then SAVE (see below). 

Top Level Menu

The 

Top Level

menu screen has four

options selectable using the right/left

arrow buttons: CONFIGURATION (of)
INPUTS, CONFIGURATION (of) OFF-
SETS, SAVE CONFIG? and ERASE
CONFIG?. 

CONFIGURATION (of) INPUTS

:

Using the down arrow button, CON-
FIGURATION (of) INPUTS menu
allows you to customize your PRe6 in
the following ways:  Define Input
(5.1, 7.1, Stereo, Disable), Name
Input, Set MAIN Volume, Set
SoftMute Vol(ume), Set Zone2
Volume.  Press 

ENTER

to edit a given

setting, adjust setting using the 

UP

and 

DOWN

arrow buttons and press

ENTER

again to exit edit mode.

CONFIGURATION (of) OFFSETS

:

The CONFIGURATION OFFSETS
menu allows for adjustment of the
Surround Sound speaker levels.  The

RIGHT

and 

LEFT

arrow buttons allow

you to select either Surround Input.
As you press the down arrow button,
selection options are: 

Center, LFE-

Sub

, 

Left Surround

, 

Right Surround

.

If 7.1 Surround is enabled, 

Sur Left

Back

and 

Sur Right Back

will also be

available. Surround levels can be
ad10 to –20 dB in relation to
the front main speakers. Press

ENTER

to edit a given setting, adjust

setting using the 

UP

and 

DOWN

arrow buttons and press 

ENTER

again to exit edit mode.

PRe6 Setup and Options

page 8

© 2002 bel canto design, Ltd.

PRe6 User’s Guide rev082102

Содержание PRe6

















Отзывы:

Нет отзывов