Bel Canto e.One series C7R, Руководство пользователя

Страница: 10 / 15

To enter Tuner Mode, either press ‘Tuner’ on the remote
or press and hold the control knob button in for 2 -3
seconds. After entering Tuner Mode, the display will show
the radio frequency on the left and the volume on the right.
Rotate the knob to change the highlighted value. The
volume will be highlighted by default. To highlight the
frequency, press the knob once.
Tuner Display Modes
1. Standard: displays the frequency on the left and the
volume on the right. The decimal to the right of the
frequency indicates the presence of the Stereo Carrier on
the station.
2. RDS Mode:
Radio Data Signal . When available, this
scrolls station, song, and/or artist data across the display.
Note that the RDS screen will show NO RDS until RDS
data is received from the station. The RDS function is
entirely dependent on the station sending the RDS data.
Not all stations transmit RDS data.
There are two modes of RDS function:
1) Radio Text: This is the first RDS screen in the display
rotation. When there is no data, NO RT will be displayed.
2) Program Services: This is the second RDS screen.
When there is no data, NO PS will be displayed.
Depending on the radio station, there may be similar or
quite different information displayed in each case. Note
that the RT scrolls and the PS are displayed in 8 character
segments.
3. RSSI: Received Signal Strength Indicator , on a scale of
1-100, over 40 is necessary for a good stereo signal. Less
than 40 will be a stereo blend or mono signal.
4. Product Name: C7
R
5. Software Version: displays revision of software and
region code.
6. Display Off: using the remote or the knob control will
turn the display back on for 3 seconds.
Additional Tuner Remote Functions
Presets: The C7
R
can have up to 10 presets which are
noted as P0 – P9 on the display. To program each preset,
hold the number button on the remote for 2 seconds while
tuned in to the desired frequency. For Preset 1, hold the 1
button until P1 appears on the display. To recall the
preset, simply press the number button again. To
deprogram the preset, hold the number button for 2
seconds. When the frequency reappears on the display,
the preset is deprogrammed. Continuing to hold the
number button will continuously program and deprogram
the preset.
<< , >>: Discreet tuning through the entire frequency
band. Hold either button for continuous tuning in a
particular direction.
|<<, >>| : Choose a preset station by going in numerical
value of the preset in either direction.
CH/SCAN – or +: Channel scan to the next strongest
signal.
Mono: The C7
R
can be forced into Mono Mode as
desired if the noise level for a given station is not
acceptable. Pressing the Mono button again will return to
normal Auto Stereo or Blend operation. When changing to
a new preset or tuning a new station the Mono Mode will
be reset to Auto Mode.