Bel Canto CD3t, Руководство пользователя

Страница: 9 / 11

IMPORTANT: The CD3t MUST be used with an external DAC
•
ON/OFF switch applies power when the
switch is in the 1 position.
•
Fuse Drawer with 5 amp/250V slow blow
5mm x 20mm fuse.
•
IEC power cord jack: Connect the supplied
or a quality aftermarket power cord from this
jack. Note the power setting indicated on
the back of the unit before connecting the
power.
•
IR In: Connect an IR extension emitter to
facilitate remote usage. It accepts a 38KHz
modulated IR input signal at up to 12V p-p
•
SPDIF output accepts BNC or RCA (using
supplied adapter) connections and operates at a
16/44.1 data rate.
• AES/EBU output transmits a 16/44.1 data rate
•
Volume Control Punch Through: The Volume Up and Down functions on the remote control will affect any Bel
Canto unit in Variable Output mode regardless of whether PRE, DAC, CD or TUNER is selected. It is recommended
that only the device with volume control closest to the power amps be in Variable Output mode. Any other devices
that are capable of volume control should be in Fixed Volume mode.
•
Double check all connections to and from the unit before plugging the CD3t into the power source.
•
We recommend leaving the CD3t powered up at all times.