25 / EN
Washing Machine / User’s Manual
•
Open the pump filter cap.
•
Release the loading door emergency handle located at the rear side of
the filter cap.
•
Pull down the loading door emergency handle once and open the loading
door. After opening the loading door, re-insert the loading door emergency
handle.
•
If the loading door does not open, try again by pulling down the handle.
4.3.12 Changing the selections after programme has started
Adding laundry after the programme has started
:
If the water level in the machine is suitable when you press Start/Pause
button, the door lock will be
deactivated and the door will open, allowing you to add garments. The door lock icon on the display goes off
when the door lock is deactivated. After adding garments, close the door and press
Start/Pause
button once
again to resume the washing cycle.
If the water level in the machine is not suitable when you press Start/Pause
button, the door lock
cannot be deactivated and the door lock icon on the display remains on.
C
If the temperature of the water inside the machine is above 50°C, you cannot deactivate the door lock for safety reasons,
even if the water level is suitable.
Switching the machine to pause mode:
Press the Start/Pause
button to switch the machine to pause mode. Pause symbol will flash on the display.
