28 / EN
Washing Machine / User’s Manual
Too much foam forms inside the product. (**)
• Improper detergents for the washing machine is used.
>>>Use detergents appropriate for the washing machine.
• Excessive amount of detergent is used. >>>Use only
sufficient amount of detergent.
• Detergent was stored under improper conditions. >>>Store
detergent in a closed and dry location. Do not store in
excessively hot places.
• Some meshed laundry such as tulle may foam too much
because of their texture. >>>Use smaller amounts of
detergent for this type of item.
• Detergent was put in the wrong compartment. >>>Put the
detergent in the correct compartment.
• Softener is being taken early by the product. >>>There
may be problem in the valves or in the detergent drawer.
Call the Authorised Service Agent.
Foam is overflowing from the detergent drawer.
• Too much detergent is used. >>>Mix 1 tablespoonful
softener and ½ l water and pour into the main wash
compartment of the detergent drawer.
>>>Put detergent into the product suitable for the
programmes and maximum loads indicated in the
“Programme and consumption table”. When you use
additional chemicals (stain removers, bleaches and etc.),
reduce the amount of detergent.
Laundry remains wet at the end of the programme. (*)
• Excessive foam has occurred and automatic foam
absorption system has been activated due to too much
detergent usage. >>>Use recommended amount of
detergent.
(*) The product does not switch to spinning
step when the laundry is not evenly distributed
in the drum to prevent any damage to the
product and to its surrounding environment.
Laundry should be rearranged and re-spun.
(**) Regular drum cleaning is not applied. Clean
the drum regularly. See 4.4.2
A
WARNING
• If you cannot eliminate the problem
although you follow the instructions in
this section, consult your dealer or the
Authorised Service Agent. Never try to
repair a nonfunctional product yourself.
