background image

30 / EN

Washing Machine / User Manual

3. Open the Loading Door and add or take out the laundry.

4. Close the Loading Door.

5. Make changes in speed settings, if necessary. 

6. Press Start / Pause button to start the machine. 

4.6.15 Cancelling the programme

To cancel the programme, turn the Programme Selection knob to select another 

programme. Previous programme will be cancelled. End / Cancel light will flash 

continuously to notify that the programme has been cancelled. 

Your machine will end the programme when you turn the Programme Selection knob; 

however, it does not drain the water inside. When you select and start a new programme, 

the newly selected programme will start depending on the step the previous programme 

was cancelled in. For example, it may take in additional water or continue to wash with the 

water inside.

C

Some programmes may start by discharging the water inside the machine. Depending on the 

step where the programme was cancelled in, you may have to put detergent and softener 

again for the programme you have selected anew.

4.6.16 End of programme

When the programme ends, "End" LED becomes on at the Programme Follow-up indicator. 

1. Wait until the "Door Lock Enabled LED" goes off completely.

2. To switch off the machine, turn the Programme Selection Knob to On/Off position.

3. Take out your laundry and close the loading door. Your machine is ready for the next 

washing cycle.

4.6.17 Your machine features "Pause Mode".

After you switch on your machine with the programme selection button (by switching the 

button to a different position than the On/Off position), if no programme is started or no 

other procedure is performed in the selection step or no action is taken within approx. 2 

minutes after the selected programme ends, your machine will switch to energy saving 

mode automatically. The brightness of the indicator lights will decrease. Also, if your 

product has a display that shows programme time, this display will be completely turned 

off. If you turn the Programme Selection knob or touch any button, lights and display will 

switch back to previous condition. The selections which you make when exiting from the 

energy efficiency may change. Please check the correctness of your selections before 

starting the programme. If necessary, please make your settings again. This is not an error.

Содержание WTK74011W













































Отзывы: