2
4
/ EN
Washing Machine / User’s Manual
4.3.16 Cancelling the programme
To cancel the programme, turn the Programme Selection knob to select another programme.
Previous programme will be cancelled. End / Cancel light will flash continuously to notify that the
programme has been canceled.
Your machine will end the programme when you turn the Programme Selection knob; however, it
does not drain the water inside. When you select and start a new programme, the newly selected
programme will start depending on the step the previous programme was canceled in. For example,
it may take in additional water or continue to wash with the water inside.
C
Depending on the step where the programme was canceled in, you may have to put detergent and softener
again for the programme you have selected anew.
4.3.17 End of programme
“End” appears on the display at the end of the programme.
1. Wait until the loading door light illuminates steadily.
2. Press On / Off button to switch off the machine.
3. Take out your laundry and close the loading door. Your machine is ready for the next washing
cycle.
4.3.18 Your machine features "Standby Mode".
After you switch on your machine with On-Off button, if no programme is started or no other
procedure is performed at the selection step or no action is taken within approx. 2 minutes after
the selected programme ends, your machine will switch to energy saving mode automatically.
The brightness of the indicator lights will decrease. Also, if your product has a display that shows
programme time, this display will be completely turned off. If you turn the Programme Selection knob
or touch any button, lights and display will switch back to previous condition. The selections which
you make when exiting from the energy efficiency may change. Please check the correctness of your
selections before starting the programme. If necessary, please make your settings again. This is not
an error.
