Beko WTG50M1W, Руководство пользователя

Страница: 28 / 44

28 / EN
Washing Machine / User’s Manual
Rinse hold
If you are not going to unload your clothes immediately after the programme completes,
you can use rinse hold function to keep your laundry in the final rinsing water in order to
prevent them from getting wrinkled when there is no water in the machine. Press Start
/ Pause button after this process if you want to drain the water without spinning your
laundry. Programme will resume and complete after draining the water.
If you want to spin the laundry held in water, adjust the Spin Speed and press Start / Pause
button.
The programme will resume. Water is drained, laundry is spun and the programme is
completed.
C
If the programme has not reached the spinning step, you can change the speed without
switching the machine to Pause mode.
4.6.9 Delayed Start
With the Delayed Start function the startup of the programme may be delayed up to 3, 6
or 9 hours.
C
Do not use liquid detergents when you set Delayed Start! There is the risk of staining of the
clothes.
1. Open the loading door, place the laundry and put detergent, etc.
2. Select a washing programme and spin speed.
3. Set the desired time by pressing the Delayed Start button. When the button is pressed
once, 3 hours delayed start is selected. When the same button is pressed again, 6 hours
delay is selected, and when it is pressed for the third time, 9 hours delayed start is
selected. If you press the Delayed Start button once again, Delayed Start function will be
canceled.
4. Press Start / Pause button. Previous delayed start time light turns off and next delayed
start time light turns on after every 3 hours.
5. At the end of the countdown, all delayed start lights will turn off and the selected
programme will start.
C
You can switch the machine to pause mode and add laundry during the delayed start period.
Changing the delayed start period
If you want to change the time during countdown, you will need to cancel the programme
and set the delay time again.
Canceling the Delayed Start function
If you want to cancel the delayed start countdown and start the programme immediately:
1. Turn the Programme Selection knob to any programme. Thus, Delayed Start function
will be canceled. The End/Cancel light flashes continuously.
2. Then, select the programme you want to run again.
3. Press Start / Pause button to start the programme.