Beko WTE12745 X0D, Руководство пользователя

Страница: 25 / 36

25 / EN
Washing Machine / User’s Manual
Opening the loading door in case of power failure:
C
In case of power failure, you can use the loading door emergency handle under the pump filter cap to open the loading
door manually.
A
CAUTION:
To avoid any water overflow before opening the loading door, make sure there is no water left inside the
machine.
•
Open the pump filter cap.
•
Release the loading door emergency handle located at the rear side of
the filter cap.
•
Pull down the loading door emergency handle once and open the loading
door. After opening the loading door, re-insert the loading door emergency
handle.
•
f the loading door does not open, try again by pulling down the handle.
4.3.12 Changing the selections after programme has started
Adding laundry after the programme has started :
If the water level in the machine is suitable when you press
Start/Pause
button, the door lock will be
deactivated and the door will open, allowing you to add garments. The door lock icon on the display goes off
when the door lock is deactivated. After adding garments, close the door and press
Start/Pause
button once
again to resume the washing cycle.
If the water level in the machine is not suitable when you press
Start/Pause
button, the door lock cannot be
deactivated and the door lock icon on the display remains on.
C
If the temperature of the water inside the machine is above 50°C, you cannot deactivate the door lock for safety reasons,
even if the water level is suitable.