5
5
6
6
6
6
Installation of the washer
Installation of the washer
It is strictly prohibited to place
children or lay
weights on the
washer.
小天鹅
Prohibited
Please do not pull the electric cord
when pulling out the
plug.
!
Prohibited
Do not replace power cord
by yourself.
小天鹅
Prohibited
Do not fill the tub with water manually.
Please do not wash down jacket,
raincoat, fishing coat and similar
clothes in the
washer.
Prohibited
Please ensure that the water inlet pipe
is connected and the tap is opened
before washing
clothes.
!
！
Warning
Installation of water inlet pipe
Put the water inlet pipe(which has
metallic filtering bag) screw on to the tap.
Tightly screw another end of water
inlet hose on water inlet valve .
(with rubber seal ring inside).
Note: When tightening the
clamping nut, evenly apply the
force and do not twist the water
inlet valve to avoid breaking of
water inlet valve joint.
Water inlet hose
Clamping nut
Remove package
Remove package and take out the bottom board of
the cabinet on the foam cover.
Open the lid of washer's door and take out accessories.
A trial operation or washing on the foamed cushion
is strictly forbidden.
Base foamed cushion
The height of drain hose (“a”)should between 86-100 cm.
Diameter of “b”shuld not less than 3 cm, and flow capacity
not less than 40 L/Min.
86~100
cm
Before washing machine starts, user should hang up the
drain pipe 86-100cm height from the floor.
Placement of upper water drain hose
Safety and precautions
Содержание WTAU13AW
Страница 1: ......
