Beko WRYS51022C, Руководство пользователя

Страница: 39 / 48

39 / EN
Washing Machine / User’s Manual
Canceling the Delayed Start function
If you want to cancel the delayed start countdown and start the programme immediately:
1. Set the Delayed Start period to zero or turn the Programme Selection knob to any programme. Thus,
Delayed Start function will be canceled. The End/Cancel light flashes continuously.
2. Then, select the programme you want to run again.
3. Press Start / Pause button to start the programme.
5.11 Starting the programme
1. Press Start / Pause button to start the programme.
2. Programme follow-up light showing the startup of the programme will turn on.
C
If no programme is started or no button is pressed within 1 minute during programme selection process, the machine
will switch to Pause mode and the illumination level of the temperature, speed and loading door indicator lights will
dim. Other indicator lights and indicators will turn off. Once the Programme Selection knob is rotated or any button is
pressed, indicator lights and indicators will turn on again.
5.12 Functions/Programmes Selected by Pressing the Function Buttons for 3 Seconds
• Drum Clean 3 II
Press and hold the auxiliary function button 1 for 3 seconds to select the programme.
Use regularly (once in every 1-2 months) to clean the drum and provide the required hygiene. Operate the
programme while the machine is completely empty. To obtain better results, put powder lime-scale remover for
washing machines into the detergent compartment no. “2”. When the programme is over, leave the loading door ajar
so that the inside of the machine gets dry.
C
This is not a washing programme. It is a maintenance programme.
Do not run the programme when there is something in the machine. If you try to do so, the machine detects that
there is load inside and aborts the programme.
• Child lock I
Use Child Lock function to prevent children from tampering with the machine. Thus you can avoid any changes in a
running programme.
C
If the Programme Selection knob is turned when the Child Lock is active, "Con" appears on the display. The Child
Lock does not allow any change in the programmes and the selected temperature, speed and auxiliary functions.
Even if another programme is selected with the Programme Selection knob while the Child Lock is active,
previously selected programme will continue running.
To activate the Child Lock:
2. Pres and hold the Auxiliary Function button for 3 seconds. C03, C02, C01 will appear on the display respectively
while you keep the button pressed for 3 seconds. Then, while the light of the Auxiliary Function button 2 is flashing,
«Con» will appear on the display indicating that the child lock has been activated. If you press any button or turn the
Programme Selection knob when the Child Lock is active, same phrase will appear on the display.
To deactivate the Child Lock:
Press and hold the Auxiliary Function button 2 for 3 seconds while a programme is running. C03, C02, C01 will appear
on the display respectively while you keep the button pressed for 3 seconds. Then, while the light of the auxiliary
function button 2 is flashing, «COF» will appear on the display indicating that the child lock has been deactivated.
C
In addition to the method above, to deactivate the Child Lock, switch the Programme Selection knob to On / Off
position when no programme is running, and select another programme.
Child Lock is not deactivated after power failures or when the machine is unplugged.
5.13 Progress of programme
Progress of a running programme can be followed from the Programme Follow-up indicator. At the
beginning of every programme step, the relevant indicator light will turn on and light of the completed
step will turn off.
You can change the auxiliary functions, speed and temperature settings without stopping the programme
flow while the programme is running. To do this, the change you are going to make must be in a step after
the running programme step. If the change is not compatible, relevant lights will flash for 3 times.
C
If the machine does not pass to the spinning step, Rinse Hold function might be active or the automatic unbalanced
load detection system might be activated due to the unbalanced distribution of the laundry in the machine.
5.14 Loading door lock
There is a locking system on the loading door of the machine that prevents opening of the door in cases
when the water level is unsuitable.