16 / EN
Washing Machine / User’s Manual
5. Make changes in auxiliary functions, temperature
and speed settings if necessary.
6. Press Start / Pause button to start the machine.
4.16 Cancelling the programme
To cancel the programme, turn the Programme
Selection knob to select another programme.
Previous programme will be cancelled. End / Cancel
light will flash continuously to notify that the
programme has been canceled.
Pump function is activated for 1-2 minutes
regardless of the programme step, and whether
there is water in the machine or not. After this
period, your machine will be ready to start with the
first step of the new programme.
C
Depending on the step where the programme
was canceled in, you may have to put detergent
and softener again for the programme you have
selected anew.
4.17 End of programme
“End” appears on the display at the end of the
programme.
1. Wait until the loading door light illuminates
steadily.
2. Press On / Off button to switch off the machine.
3. Take out your laundry and close the loading door.
Your machine is ready for the next washing cycle.
4.18 Your machine is equipped
with a "Standby Mode"
In case of not starting any programme or waiting
without making any other operation when the
machine is turned on by On/Off button and while
it is in selection step or if no other operation is
performed approximately 2 minutes after the
programme you selected has come to an end, your
machine will automatically switch to energy saving
mode. Brightness of indicator lights will de crease.
Also, if your product is equipped with a display
showing the programme duration, this display
will completely turn off. In case of rotating the
Programme Selection knob or pressing any button,
lights and display will restore to their previous
condition. Your selections made while exiting
the energy saving mode may change. Check the
appropriateness of your selections before starting
the programme. Readjust if necessary. This is not a
fault.
Lift the rear part of the siphon to remove it as
illustrated.
C
If more than normal amount of water
and softener mixture starts to gather in
the softener compartment, clean the
siphon.
2 Wash the detergent drawer and the siphon with
plenty of lukewarm water in a washbasin. Wear
protective gloves or use an appropriate brush to
avoid touching of the residues in the drawer with
your skin when cleaning.
3 After cleaning, replace the siphon back to its
seating and push its front section downwards to
make sure that the locking tab engages.
5.2 Cleaning the loading door and the drum
Residues of softener, detergent and dirt may
accumulate in your machine in time and may cause
unpleasant odours and washing complaints. To
avoid this, use the
Drum Cleaning programme. If
your machine is not featured with
Drum Cleaning
programme, use
Cottons-90 programme and select
Additional Water or Extra Rinse auxiliary functions
as well. Run the programme without any laundry
in the machine. Before starting the programme,
put max. 100 g of powder anti-limescale into the
main wash detergent compartment(compartment
nr. 2). If the anti-limescale is in tablet form, put only
one tablet into compartment nr. 2. Dry the inside
of the bellow with a clean piece of cloth after the
programme has come to an end.
C
Repeat Drum Cleaning process in every
2 months.
C
Use an anti-limescale suitable for the
washing machines.
After every washing check that no foreign
substance is left in the drum.
5 Maintenance and cleaning
Service life of the product extends and frequently
faced problems decrease if cleaned at regular
intervals.
5.1 Cleaning the detergent drawer
Clean the detergent drawer at regular intervals
(every 4-5 washing cycles) as shown below in order
to prevent accumulation of powder detergent in
time.
Содержание WRE 6532 B0
Страница 2: ......
Страница 91: ...91 CZ Plně automatická pračka Uživatel Manuální ...
Страница 92: ...www beko com ...