Beko WMB81445L, Инструкция по установке и эксплуатации

Страница: 20 / 40

20 - EN
Auxiliary functions
Auxiliary Function Selection Buttons
a b c d
• Depending on the program, you can
select the desired auxiliary function by
pressing the buttons a, b, c,d.
• Select the required auxiliary functions
before starting the program.
• Some combinations cannot be selected
together. Ex.: Pre-wash and Quick
Wash.
• Symbol of the selected auxiliary function
will light up.
Auxiliary function selection
If an auxiliary function that should not be
selected together with a previously selected
function is chosen, the first selected function
will be cancelled and the last auxiliary
function selection will remain active.
Ex.: If you want to select pre-wash first and
then quick wash, pre-wash will be cancelled
and quick wash will remain active.
Auxiliary function that is not compatible
with the program cannot be selected. (see,
“Program Selection Table”)
• Prewash
When you select this function (a), the display
will indicate “F1” symbol.
• A pre-wash is only worthwhile for
heavily soiled laundry. Without pre-wash
you save energy, water, detergent and
time.
• Pre-wash without detergent is
recommended for lace and curtains.
• Quick Wash
With this function (b), the wash time is
shortened. “F2” symbol lights up on the
display.
• Use this function for smaller amounts or
slightly soiled laundries.
• Extra Rinse
When this function (c) is selected, washing
and rinsing is performed with plenty of
water. “F3” symbol lights up on the display.
• Anti- Crease
With this function (d), drum movement
will be lessened to prevent creasing and
spinning speed is limited. In addition,
washing is carried out at a higher water
level. “F4” symbol lights up on the display.
• Use this function for delicate laundries
that crease easily.
C Whenever you select this auxiliary
function, load your machine with half of
the maximum laundry specified in the
program table.
• Rinse Hold
If you are not going to unload your clothes
immediately after the program completes,
you may use rinse hold function and keep
your laundry in the final rinsing water in order
to prevent them become wrinkled when
there is no water in the machine. Press
“Start/Pause” button after this process if you
want to drain the water without spinning.
Program resumes. Your machine drains the
water and program completes.
If you want to spin your laundry that you left
in water:
- Adjust the spin speed.
- Press Start/Pause button
Program resumes. Your machine drains
the water, spins the laundry and program
completes.
Time display
The display shows the time remaining for
the program to complete while a program
is running. Time is displayed in hours and
minutes as “ 01:30 ”.
Time delay
With the “Time delay” function you can
delay the program start up to 24 hours.
Setting can be made in intervals of 30