Beko WMB 71031, Руководство пользователя, Страница: 8 / 13

8 - EN
Auxiliary functions
Auxiliary Function Selection Buttons
Select the required auxiliary functions before
starting the program. Furthermore, you may also
select or cancel auxiliary functions that are suitable
to the running program without pressing the "Start/
Pause" button. To select or cancel the auxiliary
functions, the machine must be at any prior
stage than the auxiliary function to be selected
or cancelled. If the auxiliary function cannot be
selected or cancelled, light of the relevant auxiliary
function will blink 3 times to warn the user.
C
Some combinations cannot be selected
together. Ex.: Pre-wash and Quick Wash.
Warning light of the selected auxiliary function
will light up.
Auxiliary function selection
If an auxiliary function that is not compatible with
the previously selected auxiliary function is chosen,
the function selected first will be cancelled and the
last auxiliary function selection will remain active.
Ex.: If you want to select pre-wash first and then
quick wash, pre-wash will be cancelled and quick
wash will remain active.
Auxiliary function that is not compatible with the
program cannot be selected. (see, “Program
Selection Table”)
C
Auxiliary function buttons may differ according
to the model of your machine.
• Prewash
A pre-wash is only worthwhile for heavily soiled
laundry. Without pre-wash you save energy, water,
detergent and time. Pre-wash without detergent is
recommended for lace and curtains.
• Quick Wash
This function can be used for “Cottons” and
“Synthetics” programs. It decreases the washing
times for lightly soiled laundries and also the
number of rinsing steps.
C
Recommended load capacity is half of the
maximum load capacity of the selected
program.
• Rinse Plus
This function enables your machine to make
another rinsing in addition to the one already made
after the main wash. Thus, the risk for sensitive
skins (babies, allergic skins and etc.) to be effected
by the minimal detergent remnants on the laundry
can be reduced.
• Anti-Creasing
With this function, drum movement will be
lessened to prevent creasing and spinning speed
is limited. In addition, washing is carried out at a
higher water level.
• Rinse Hold
If you are not going to unload your clothes
immediately after the program completes, you
may use rinse hold function and keep your laundry
in the final rinsing water in order to prevent them
become wrinkled when there is no water in the
machine. Press "Start/Pause" button after this
process if you want to drain the water without
spinning. Program resumes. Your machine drains
the water and program completes.
If you want to spin your laundry that you left in
water:
- Adjust the spin speed.
- Press Start/Pause button
Program resumes. Your machine drains the water,
spins the laundry and program completes.
In case of selecting the auxiliary function for
soaking, your laundry will be kept in detergent
water before the washing process starts. Hence,
stains that ingrained into the laundry can be
removed better.
• Pet hair removal
This function helps you to remove the pet hairs
that remain on your clothes.
When this function is selected, your machine
adds pre-wash and additional rinsing steps to
the normal program cycle. Thus, pet hairs are
removed more effectively by performing the
washing with more water (30%).
A
Never wash your pets in your washing
machine.
Time display
The display shows the time remaining for the
program to complete while a program is running.
Time is displayed in hours and minutes as “01:30”.
Time delay
With the “Time delay” function you can delay the
program startup up to 19 hours. Time delay can
be increased in one-hour increments.
C
Do not use liquid detergent when you set
time delay! There is the risk of staining of the
clothes.
1. Open the loading door, place the laundry
inside and fill detergent drawer.
2. Select the washing program, temperature,
spin speed and, if required, the auxiliary
functions.
3. Pres “Time Delay” button to adjust the desired
time.
4. Press "Start/Pause" button. The time delay
will start to count down. The set time delay is
displayed. The "_" symbol displayed near the
time delay starts flickering up and down.
C
Additional laundry may be loaded during the
time delay period.
5. The selected program duration is displayed
at the end of the countdown process. "_"
symbol disappears and the selected program
starts.
Changing the delay time
If you want to change the time during the
countdown:
1. Press the time delay button. Every time the
button is pressed, the time will be increased in