Beko WMA 727 S, Инструкция по установке и эксплуатации

Страница: 18 / 36

EN
18
the temperature anticipated for that
program appears on the temperature
indicator (13b).
To change the temperature, press
the temperature button (Figure 2-9).
Temperature falls with 10° decrements.
Cold selection is shown with “-” symbol.
When the “Temperature” button is
pressed after coming to the Cold
selection, the maximum temperature of
the program you have selected will be
displayed.
To decrease the temperature, press the
“Temperature” button again.
90˚C
Normally soiled, white
cottons and linens. (Ex.:
coffee table covers,
tablecloths, towels, bed
sheets)
60˚C
Normally soiled, fade proof
colored linens, cottons
or synthetic clothes
(Ex.: shirts, nightgowns,
pajamas) and lightly soiled
white linen clothes (Ex.:
underwear)
40˚C-
30°C-
Cold
For delicate clothes (Ex.: veil
curtains), blended clothes
including synthetics and
woolens.
Spin Speed selection
Whenever a new program is selected,
the maximum spin speed of the selected
program is displayed on the spin speed
indicator (Figure 3-13a).
To decrease the spin speed, press
the “Spin” button (Figure 2-7). Spin
speed decreases gradually. Then, rinse
hold and no spin options are shown
respectively.
Rinse hold is shown with “ ” and no
spin is shown with “ ” symbols.
If you do not want to unload your
clothes immediately after the program,
you may use the rinse hold function in
order to prevent your clothes become
wrinkled in an anhydrous condition. With
this function, your laundry is kept in the
final rinsing water. If you want to spin
your laundry after the rinse hold function:
- Adjust the spin speed.
- Press Start/Pause/Cancel Button.
Program resumes. Your machines
drains the water and spins your
laundry.
You can use no spin function in order to
drain the water without spinning at the
end of the program.
e