Beko WM7110W, Инструкции по установке и эксплуатации, а также рекомендации по стирке

Страница: 25 / 40

EN
Changing the Delayed Start period
Press Delayed Start button. Every time
the button is pressed, the period will
change in 3-hour increments and the light
of the selected delayed start time will turn
on.
Cancelling the Delayed Start function
If you want to cancel the delayed start
countdown and start the programme
immediately:
Set the Delayed Start period to zero (all
delayed start period lights will turn off)
or turn the Programme Selection knob
to any programme. Thus, Delayed Start
function will be cancelled. The End/Cancel
light flashes continuously. Then, select
the programme you want to run again.
programme.
Starting the programme
programme. Programme follow-up light
showing the startup of the programme will
turn on.
Child Lock
Use child lock function to prevent children
from tampering with the machine. Thus
you can avoid any changes in a running
programme.
If the Programme Selection knob is
rotated when the child lock is active,
st
and 2
nd
auxiliary
function buttons will blink 3 times. The
child lock does not allow any change
in the programmes and the selected
temperature, speed and auxiliary
functions.
Even if another programme is
selected with the Programme
Selection knob while the Child
Lock is active, previously selected
programme will continue running.
When the Child Lock is active and
the machine is running, you can
switch the machine to Pause mode
without deactivating the Child Lock
by turning the Programme Selection
you turn the Programme Selection
knob afterwards, the programme will
resume.
To activate the Child Lock:
st
and 2
nd
Function buttons for 3 seconds. The
st
and 2
nd
buttons will flash while you keep the
buttons pressed for 3 seconds.
To deactivate the Child Lock:
st and 2 nd auxiliary
function buttons for 3 seconds while any
programme is running. The lights on the
st and 2 nd
flash while you keep the buttons pressed
for 3 seconds.
In addition to the method above, to
deactivate the Child Lock, switch the
Programme Selection knob to On
is running, and select another
programme.
When the power is restored after a
power failure or after your machine
is unplugged and plugged in again,
the Child Lock will not be deactivated
when the machine resumes operating.