background image

6    

EN

Please read the following information. 

Otherwise, there may be the risk of 

personal injury or material damage. 

Moreover, any warranty and reliability 

commitment will become void.

General Safety

•  Never place your machine on a 

carpet covered floor. Otherwise, 

lack of airflow from below your 

machine may cause electrical parts to 

overheat. This may cause problems 

with your washing machine.

•  If the power cable or mains plug is 

damaged you must call Authorized 

Service for repair.

•  Check water hoses for wear. Do not 

use old/used water inlet hoses. These 

may cause stains on your laundry.

•  Fit the drain hose into the waste 

water system securely to prevent any 

water leakage and to allow machine 

to take in and discharge water as 

required. It is very important that the 

water intake and drain hoses are not 

folded, squeezed, or broken when 

the appliance is pushed into place 

after it is installed or cleaned.

•  Your washing machine is designed to 

continue operating when the power 

restores after a power interruption. 

You cannot cancel any program by 

pressing the “On/Off button.” The 

machine will resume its program 

when the power restores. Press the 

“Start/Pause/Cancel” button for 3 

seconds to cancel the program (See, 

Cancelling a Program)

•  There may be some water in your 

machine when you receive it. This is 

from the quality control process and 

is normal. It is not harmful to your 

machine.

•  Some problems you may encounter 

may be caused by the software. 

Press “Start/Pause/Cancel” button 

for 3 seconds to cancel the program 

set in your machine before calling the 

authorized service.

First Use

•   To prepare your machine for 

washing, carry out your first washing 

process without loading your 

machine and with detergent under 

“Cottons 90°C” program.

•  Ensure that the cold water 

connections has been made correctly 

when installing your machine.

•  If the current fuse or circuit breaker is 

less than 15 Amperes, please have 

a qualified electrician install a 15 

Ampere fuse or circuit breaker.

•  To make your machine ready for use, 

please be sure that the tap water 

supply and water drainage systems 

are appropriate before calling the 

authorized service. If they are not, 

call a qualified plumber to have any 

necessary arrangements carried out.

Intended use

•  This product has been designed for 

home use.

•   The appliance may only be used for 

washing and rinsing of textiles that 

are marked accordingly.

•   Only detergents, softeners and 

supplements suitable for washing 

machines may be used.

•   Observe the care instructions labelled 

on textile products and any other 

instructions given by companies that 

produce detergents for your machine.

Safety instructions

•   This appliance must be connected to 

an earthed outlet protected by a fuse 

of suitable capacity.

•   The supply and draining hoses must 

always be securely fastened and 

remain in an undamaged state.

•  Fit the draining hose to a washbasin 

or waste system securely before 

starting up your machine. There may 

be a risk of being scalded due to high 

washing temperatures!

•  Never open the door or remove the 

filter while there is still water in the 

drum. Otherwise, there may be the 

 Warnings

Содержание WM 6133 S





































Отзывы: