Beko WM 5100 S Скачать руководство пользователя

Страница: 18 / 32

Auxiliary functions

Auxiliary function selection keys

• Desired auxiliary function depending

on the program is selected.

• Some combinations cannot be

selected together.

• Warning signal on the selected

auxiliary function will light up.

Auxiliary function buttons may differ

according to the model of your machine.

Auxiliary function selection

If an auxiliary function that should not

be selected together with a previously

selected function is chosen, the first

selected function will be cancelled and

the last auxiliary function selection will

remain active.

Auxiliary function that is not compatible

with the program cannot be selected.

(see, “Program Selection Table”)

Pre-wash

A pre-wash is only worthwhile for heavily

soiled laundry. Without pre-wash you

save energy, water, detergent and time.

Pre-wash without detergent is

recommended for lace and curtains.

Less detergent should be put in the

main wash compartment as loose

knit fabrics (lace) foam too much

due to its meshed structure.

Extra Rinse

With this function, you can increase the

number of current rinsing steps. Thus,

sensitive skins’ risk of being affected by

the remainder detergent on the clothes

will be decreased.

Rinse hold

If you do not want to unload your

clothes immediately after the cotton,

synthetics, woolen and delicate fabrics

program, you may release your clothes

inside the machine in the last rinsing

water by pressing the rinse hold button

in order to prevent your clothes become

wrinkled. After this process you may

spin your laundry by pressing “Start/

Pause/Cancel” button or you may end

the program by pressing “Start/Pause/

Cancel” button for 3 sec.

•

In the machines equipped with spin

speed selection knob or button, you

can spin by selecting the desired

spin speed and press “Start/Pause/

Cancel” button.

•

As for machines not equipped with

a spin speed selection knob, you

can end the program without a

spin cycle by pressing the “Start/

Pause/Cancel” button and draining

the water. If you wish your clothes

be spun, you can spin them by

selecting “pump+spin” program.

Spin speed reduction

You may use the speed reduction

button whenever you wish to spin

your clothes below the maximum spin

speed. When speed reduction button

is pressed, spin speed will be at the

minimum rpm given on the panel.

No spin

You may use this program if you do not

want to spin your clothes at the end of

cottons, synthetics, woolen or delicate

programs.

No Heat

If you wish to wash your clothes in cold

water, you can use this program.

Starting the Program

1. Press “Start/Pause/Cancel” button

to start the program.

2. “Start/Pause/Cancel” button will

light up to indicate that the program

has started.

3. The door is locked and the “Lid”

light fades.

Progressing a program

Progress of a running program is shown

through the program follow-up indicator.

•

At the beginning of every program

step, the relevant indicator lamp will

light up and light of the completed

step will turn off. The symbol that is

lit up at the far right of the series of

symbols indicates the step that is

being carried out.

Содержание WM 5100 S

































Результаты поиска

Содержание WM 5100 S

Отзывы:

Похожие инструкции для WM 5100 S

Бренды по названию

Популярные бренды

Beko WM 5100 S, Инструкции по установке и эксплуатации, а также рекомендации по стирке

Результаты поиска

Содержание WM 5100 S

Отзывы:

Похожие инструкции для WM 5100 S

Бренды по названию

Популярные бренды