Beko WI 1382, Руководство пользователя

Страница: 28 / 52

28
EN
6 Maintenance and cleaning
Detergent Drawer
Remove any powder residue buildup in the
drawer. To do this;
1
2
3
4
1. You can remove the detergent drawer
by pulling it towards yourself strongly.
C
If more than a normal amount of
softener and liquid detergent mixture
starts to remain in the softener
compartment, the siphon must be
cleaned.
2. Wash the drawer and the siphon
with plenty of lukewarm water in a
washbasin. Wear protective gloves
or use an appropriate brush to avoid
touching the residues in the drawer
when cleaning.
3. Replace the drawer into its housing
after cleaning. Check if the siphon is in
its original location.
The loading door and the drum
After each wash:
• Check if there are any foreign
substances in the drum.
• Open the hole in the bellow with the
aid of a toothpick if it is clogged.
C Foreign metal substances in your
machine can cause rust stains. In
such cases:
Clean the drum with a stainless steel
cleaning agent. Never use steel wool
or wire wool.
Body and control panel
When necessary:
• Wipe the exterior panels of your
machine with soapy water or mild
detergent. Dry it with a soft cloth.
• Use only a soft and damp cloth to
clean the control panel.
A Never use a sponge or scrubbing
material. These will damage the
painted and plastic parts.
Inlet water filters
There is a filter at the end of each
water intake valve at the back side of
the machine and also at the end of
each water intake hose where they are
connected to the tap. These filters prevent
the foreign substances and dirt in the
water to enter into the machine. Filters
should be cleaned as they get dirty.