Beko RCSA365K20DP, Инструкция по эксплуатации

Страница: 16 / 84

Using the water dispenser
*optional
It is normal for the first few glasses of
water taken from the dispenser to be
warm.
If the water dispenser is not used for
a long period of time, dispose of first few
glasses of water to obtain fresh water.
1. Push in the lever of the water
dispenser with your glass. If you are
using a soft plastic cup, pushing the lever
with your hand will be easier.
2. After filling the cup up to the level you
want, release the lever.
Please note, how much water flows
from the dispenser depends on how far
you depress the lever. As the level of
water in your cup / glass rises, gently
reduce the amount of pressure on the
lever to avoid overflow.
If you slightly press the arm, the water
will drip; this is quite normal and not a
failure.
Filling the water dispenser's tank
Water tank filling reservoir is located
inside the door rack.
1. Open the cover of the tank.
2. Fill the tank with fresh drinking water.
3. Close the cover.
Do not fill the water tank with any
other liquid except for water such as fruit
juices, carbonated beverages or
alcoholic drinks which are not suitable to
use in the water dispenser. Water
dispenser will be irreparably damaged if
these kinds of liquids are used. Warranty
does not cover such usages.
Some chemical substances and
additives contained in these kinds of
drinks/liquids may damage the water
tank.
Use clean drinking water only.
14
EN