Beko P7, Руководство по обслуживанию

Страница: 19 / 129

By pressing the ( ) button on your
remote control please enter the Picture
menu. You can enter this menu directly
by pressing the ( ). Select the setting
function you want using the Up and
down buttons (
)/( ) and adjust their
levels with the right and left
( )/( ).
The picture brightness, contrast, color
and sharpness levels can all be adjusted
according to your desire. The changes
you make in the picture settings will be
automatically stored without any further
transactions necessary being your
Personal settings.
Static Reduction: Using this feature you can
reduce static by selecting Normal, Soft, Softest,
Sharpest and Sharp function.
Smart Picture: This is one of the pre-installed
and unchangeable features, to select
this feature use your ( )/( ) buttons.
Soft, Natural and Rich are constant
values. User are the values you stored
into memory. Furthermore, you can select
one of the non-adjustable default settings in the
memory (Picture Mode) by pressing the “
“
button on your remote control.
Picture Format: This feature enables you to
watch any broadcast image in the format
you desire. These are; Auto, 16:9
Subtitle, Letterbox, 4:3 and Zoom. You
can do the selection without entering
the picture menu by using the ”
“
format selection button.
Color Tint: When NTSC video is used in SCART,
Color Tint settings can be made. If you do not
use such a video type the Color Tint choice is
not seen in the menu. If NTSC video is used in
SCART this choice becomes active and can be
seen in the menu.
Picture Setup (Green button) Depending on the type of broadcast being
transmitted, programmes can be viewed in a
number of formats. Press the ”
“ button
repeatedly to select between Zoom, Letterbox,
Subtitle, Auto, 16:9, and 4:3 .
Please note: Whenever the MENU button is
pressed the picture size setting will change while
the menus are ON the screen. This is to ensure
that the menus do not overlap the edges of the
viewable area.
This setting will entarge the image
to fit the screen by streching the
image horizontally, holding the
correct proportions at the centre
of the image. Some distrotion may
occur.
Use this setting when watching a
widescreen DVD, widescreen video
tape or a 16:9 broadcast (when
available). Due to the range of
widescreen formats (16:9, 14:9,
20:9 etc.) black bars may be
visible on the top and bottom of
the screen. Letterbox format
removes blck bars or makes it much
less visible.
When subtitles are included on a
letterbox format broadcast, this
setting will raise the picture to
ensure that all the text is displayed.
Some channels may send
automatic screen formatting. If you
wish to swich automatically to this
format select Auto.
The TV will outomatically switch
to detected format from the scart
inputs.
Use this setting when wathching
a widescreen DVD, widescreen
video tape or a 16:9 broadcast
(when available). Due to tre range
of widescreen formats (16:9,
14:9, 20:9 etc.) black bars may
be visible on the top and bottom
of the screen.
Use this setting to view a trie 4:3
broadcast.
Using the special functions to change the size of the
displayed image (i.e. changing the height/width ratio) for
the purposes of public display or commercial gain may
infringe on copyright laws.
Auto
16:9
Subtitle
Letterbox
4:3
Zoom